Maintenence Guide

Download pdf

General

The furniture have to be used for its intended purpose. Do not use the furniture for a substantial physical strength. Any objects should not be suspended to the doors and drawer side , and it is recommended to close the doors and drawers slowly. After installation of certain customary sinkage is normal. Consequently the furniture details (hinges, handles, shock absorbers, the drawer rails), may need adjustment and / or tighten. Mostly this is not threat to the persistence of furniture, but is merely a visual deficiency. Should be avoided, that the doors and drawers do not "hang" or harm some other way the furniture finishing. Adjustment work can be done independently, but are recommended to let adjust by the specialist of that area. There is a risk of injury (dents, cracks, etc..) when loading of heavy objects on the surface. Details can not tolerate shocks or sharp objects. Parts surfaces in contact with fiery and hot objects can remain burns. Liquid must be removed from surface (using a soft cloth) immediately in order to prevent the furniture swell.

Humidity and Temperature

Materials do not like excessive moisture or excessive dryness, as well as excessive heat or too cold environment can damage the parts. Otherwise the components may swell, pull or bend the crack. Pay special attention to the washbasin environments, which usually is the biggest threat to the furniture water damage. Furniture's ideal room temperature is from 20 to 23 degrees and the humidity from 50 to 60 percent. Particularly dangerous are sudden temperature and humidity changes. Inorder to protect surfaces of furniture from bleaching avoid direct sunlight. Natural materials, waxes, oils are the finishing materials which sunlight damages a lot.

Finished Surfaces Maintanence

Furniture should be cleaned regularly. The best way to keep the freshness of the furniture is to immediately remove the dirt. Initially soiled surfaces may be cleand with weak soft cloth moistened with soapy water, then the cloth rinsed with clean water soaked. Finally, we suggest to dry that the surfaces with a soft cloth. Do not drown or wash the surfaces with plenty of water. Should not be used unknown unknown effect of abrasive stuff it can permanently damage furniture's surfaces. Furniture can be cleaned in funriture cleaner (before the use read instructions). Furniture surfaces are recommended to treat with funriture wax in order to to ensure the long life expectancy.

Finish update

New layer to worn furniture surfaces of oiled or waxed surfaces may be added as necessary. To the frequent and intense use surfaces are recommended to repeat the oiling / waxing every three months. From painted and varnished surfaces entire surface should be removed by grinding avoiding the removal of wood material. After that to refinish the surfaces newly. Caution: The materials, cloths and wooden chips which had been in touch with oil, of varnish may catch fire by itself. These things must be wetted with water , maintain in sheet bottle or burn instantly.